CR Injector Tools Archives - OUS https://ous-tech.com/fr/categorie-produit/cr-injector-tools/ Solutions universelles Wed, 26 Feb 2025 08:41:17 +0000 fr-FR hourly 1 https://wordpress.org/?v=6.9.1 https://ous-tech.com/wp-content/uploads/2025/12/cropped-OUS_icon_2-32x32.png CR Injector Tools Archives - OUS https://ous-tech.com/fr/categorie-produit/cr-injector-tools/ 32 32 251062825 (TD-30PR-00) PRE-TESTER 2 https://ous-tech.com/fr/produit/td-30pr-pre-tester-2/?utm_source=rss&utm_medium=rss&utm_campaign=td-30pr-pre-tester-2 Thu, 02 May 2024 10:03:05 +0000 https://ous-tech.com/?post_type=product&p=1950   The next-generation device facilitates fast and fully automated preliminary testing of injectors.

  It is specifically designed to replace the traditional hand pump’s mechanical gauge.

  Suitable for all applications:

  • CR injectors
  • Unit injectors &  unit pumps
  • Traditional injectors

The post (TD-30PR-00) PRE-TESTER 2 appeared first on OUS.

]]> Basic features:

  • Determination of the nozzle opening pressure
  • Leak test (static leakage of the injector)
  • Automatic detection of short circuits, coil breaks, low capacity for piezo, and short to the body
  • Built in pressure sensor
  • An automatic mode for generating pulses based on threshold pressure
  • Automatic detection of the injector connection
  • Automatic detection of the type of connected injector – piezo or electromagnetic
  • Automatic detection of the polarity of the piezo injector
  • The ability to update software online via PC software using Bluetooth or USB connection
  • Information displayed on a 3.2” color screen, with control provided by an encoder
  • The ability to print reports via software on a PC

 

Included Accessories:

  • Tester with power adapter
  • PC Software
  • CR Injector cables set
  • Hand pump (optional)

The post (TD-30PR-00) PRE-TESTER 2 appeared first on OUS.

]]> 1950 (TD-10NT-N42) BOSCH CRIN 4.2 TOOL SET https://ous-tech.com/fr/produit/td-10nt-n42-bosch-crin-4-2-tool-set/?utm_source=rss&utm_medium=rss&utm_campaign=td-10nt-n42-bosch-crin-4-2-tool-set Tue, 19 Mar 2024 13:13:09 +0000 https://ous-tech.com/?post_type=product&p=1930 Tool set for Bosch CRIN 4.2 injectors.

Allows to completely disassemble and assemble the injector.

Suitable for the TD-30TW-00 or any other torque wrench with 18×14 mm slot.

The post (TD-10NT-N42) BOSCH CRIN 4.2 TOOL SET appeared first on OUS.

]]> The post (TD-10NT-N42) BOSCH CRIN 4.2 TOOL SET appeared first on OUS.

]]> 1930 (TD-0012-NW) CR INJECTOR HYDRAULIC REMOVER https://ous-tech.com/fr/produit/td-0012-nw/?utm_source=rss&utm_medium=rss&utm_campaign=td-0012-nw Mon, 30 May 2022 07:21:50 +0000 https://dimed.tech/?post_type=product&p=1375  Helps to remove stuck injectors from the engine. Have unified connections for different head units.

The post (TD-0012-NW) CR INJECTOR HYDRAULIC REMOVER appeared first on OUS.

]]> The post (TD-0012-NW) CR INJECTOR HYDRAULIC REMOVER appeared first on OUS.

]]> 1375 (TD-3000-PRE) PRE TESTER https://ous-tech.com/fr/produit/td-3000-pre-pre-tester/?utm_source=rss&utm_medium=rss&utm_campaign=td-3000-pre-pre-tester Mon, 30 May 2022 06:54:04 +0000 https://dimed.tech/?post_type=product&p=1363 A device for preliminary testing of injectors.

 

The post (TD-3000-PRE) PRE TESTER appeared first on OUS.

]]> Basic features:

  • Pulse generator fore lectromagnetic and piezo injectors
  • Current and pulse length adjustment
  • Manual and automatic pressure-contolled activation

The post (TD-3000-PRE) PRE TESTER appeared first on OUS.

]]> 1363 (TD-30CK-00) CALIBRATION KIT https://ous-tech.com/fr/produit/td-30ck-00-calibration-kit/?utm_source=rss&utm_medium=rss&utm_campaign=td-30ck-00-calibration-kit Mon, 30 May 2022 06:40:41 +0000 https://dimed.tech/?post_type=product&p=1361  Special set for test benches maintenance. Allows to check all measurement units.

 

The post (TD-30CK-00) CALIBRATION KIT appeared first on OUS.

]]> Basic features:

  • High pressure sensors check up to 2200 bar
  • Low pressure sensors check up to 25 bar
  • Temperature sensors check
  • Flow measurement control through the digital flow meter or glass.

Included accessories:

  • Calibration tool
  • high-precision pressure sensors with certificates
  • high-precision flow meter with certificate
  • all necessary cables

The post (TD-30CK-00) CALIBRATION KIT appeared first on OUS.

]]> 1361 (TD-3000-EPS) EPS CODING SET https://ous-tech.com/fr/produit/td-3000-eps-eps-coding-set/?utm_source=rss&utm_medium=rss&utm_campaign=td-3000-eps-eps-coding-set Mon, 30 May 2022 05:42:42 +0000 https://dimed.tech/?post_type=product&p=1357 A set of tools for coding Denso C2i, C3i and C4i injectors on Bosch EPS-200/205 test benches.

  It allows you to perform same coding procedure as on our test benches. All functions of the EPS test bench are controlled automatically via the software.

 

The post (TD-3000-EPS) EPS CODING SET appeared first on OUS.

]]> We strongly recommend to use it together with the pedestal TD-0101-EPS205 for achieve maximum ergonomics and additional cooling for the test bench.

  • Coder
  • Special software
  • Single-channel injector holder
  • Response time sensor
  • Cables for Delphi injector

The post (TD-3000-EPS) EPS CODING SET appeared first on OUS.

]]> 1357 (TD-10NT-09) Nozzle Nut Tool for Scania XPI S18, 6 Edges https://ous-tech.com/fr/produit/td-10nt-09/?utm_source=rss&utm_medium=rss&utm_campaign=td-10nt-09 Fri, 17 Sep 2021 11:23:52 +0000 https://dimed.tech/?post_type=product&p=1097 Tool for Scania XPI injector nozzle nuts with S18 hexagon.

Special design protects the nut from damaging during untightening of used injectors.

Suitable for the TD-30TW-00 or any other torque wrench with 18×14 mm slot.

The post (TD-10NT-09) Nozzle Nut Tool for Scania XPI S18, 6 Edges appeared first on OUS.

]]> The post (TD-10NT-09) Nozzle Nut Tool for Scania XPI S18, 6 Edges appeared first on OUS.

]]> 1097 (TD-10NT-08) Nozzle Nut Tool for Cummins S15, 6 Edges https://ous-tech.com/fr/produit/td-10nt-08/?utm_source=rss&utm_medium=rss&utm_campaign=td-10nt-08 Fri, 17 Sep 2021 11:15:59 +0000 https://dimed.tech/?post_type=product&p=1095 Tool for Cummins injector nozzle nuts with S15 hexagon.

Special design protects the nut from damaging during untightening of used injectors.

Suitable for the TD-30TW-00 or any other torque wrench with 18×14 mm slot.

The post (TD-10NT-08) Nozzle Nut Tool for Cummins S15, 6 Edges appeared first on OUS.

]]> The post (TD-10NT-08) Nozzle Nut Tool for Cummins S15, 6 Edges appeared first on OUS.

]]> 1095 (TD-10NT-07) Nozzle Nut Round Tool D17 https://ous-tech.com/fr/produit/td-10nt-07/?utm_source=rss&utm_medium=rss&utm_campaign=td-10nt-07 Fri, 17 Sep 2021 08:54:20 +0000 https://dimed.tech/?post_type=product&p=1094 Tool for round injector nozzle nuts with 17 mm diameter.

Suitable for the TD-30TW-00 or any other torque wrench with 18×14 mm slot.

The post (TD-10NT-07) Nozzle Nut Round Tool D17 appeared first on OUS.

]]> The post (TD-10NT-07) Nozzle Nut Round Tool D17 appeared first on OUS.

]]> 1094 (TD-10NT-06) Nozzle Nut Tool for Denso S14, 6 Edges https://ous-tech.com/fr/produit/td-10nt-06/?utm_source=rss&utm_medium=rss&utm_campaign=td-10nt-06 Fri, 17 Sep 2021 08:36:24 +0000 https://dimed.tech/?post_type=product&p=1092 Tool for Denso injector nozzle nuts with 14 mm hexagon.

Special design protects the nut from damaging during untightening of used injectors.

Suitable for the TD-30TW-00 or any other torque wrench with 18×14 mm slot.

The post (TD-10NT-06) Nozzle Nut Tool for Denso S14, 6 Edges appeared first on OUS.

]]> The post (TD-10NT-06) Nozzle Nut Tool for Denso S14, 6 Edges appeared first on OUS.

]]> 1092